Fischer chemical injection seals

FIS V: The versatile resin for all trades
Fischer FIS V resin is approved for chemical sealing of all solid and hollow construction materials (concrete, concrete blocks, bricks, etc.), and for all applications where there is a risk to human health. It has 3 European Technical Approvals: ETA for sealing on masonry, ETA option 7 with threaded rods and tapped sleeves for non-cracked concrete, ETA for the recovery of rebars.

It thus covers all applications: iron sealing, fixing of railings, metal structures, wooden frames, but also blinds. It guarantees maximum safety and its performance has been tested in concrete as well as in bricks and concrete blocks from the largest European manufacturers.

FIS V is a two-component, high-performance vinyl ester resin. It guarantees better durability and greater resistance to high temperatures (up to +72°C for long-term use and 120°C for short-term use). With FIS V chemical sealant, anchoring is achieved without expansion constraints, which allows for reduced edge distances and center distances.

To meet the diverse needs of users carrying out small applications as well as large construction sites, the FIS V cartridge is available in the following packaging: 100, 150, 300, 360 ml. For quick and easy use, it can be used with fischer brand manual, battery or pneumatic guns.

Accompanied by the special iron sealing case, the FIS HK self-centering or long-length screens, the fischer threaded rods or tapped sockets as well as the manual, pneumatic or battery-powered guns, the FIS V resin is the ideal solution to all fixing problems.

Hybrid resin technology

Latest generation:
Hybrid Shaft (FIS HT 300 T) and Hybrid Irons (FIS HF 300 T)
Fischer hybrid resins offer superior load-bearing capacities, up to 45% higher than conventional polyester resins in solid form. These practical resins allow tradespeople to ensure the compliance and quality of their work by using a single product for all applications and surfaces.
Less susceptible to misuse and/or handling (e.g., poor cleaning conditions) thanks to the incorporation of Portland cement, they are more resistant to temperature variations and chemical attacks. Thanks to a reduced drying time, they provide a real time saving for the user.
Classified A+, these resins can therefore be used indoors without risk, due to their very low VOC emissions.

The hybrid Stem (FIS HT 300 T) is a chemical fixing sealant for all supports, perfectly suited for the installation of threaded rods, screens and threaded sleeves. It has 2 European Technical Approvals: ATE for fixing sealant on concrete, ATE for fixing sealant on masonry.

Its areas of application: common fixings carried out by locksmiths, carpenters, joiners, plumbing installers, blind makers, etc. in concrete, even wet, solid and hollow masonry. It is available in 300 ml and 380 ml and in 2 colors: gray and stone tone.

The hybrid Irons (FIS HF 300 T) is a chemical sealant perfectly suited to work carried out by masons and building professionals. It is intended for the restoration of rebars and has a European Technical Approval: ETA for the sealing of rebars.

Its areas of application: anchoring rebars for the construction of slabs, installing posts, etc. It is suitable for deep drilling. It is available in 300 ml in gray.