Terradec Fischer

 Wooden decking, often prized for the friendly atmosphere it creates, requires special attention during its installation.
fischer France, with its experience in high-performance fixing solutions, is launching a new range of products for wooden decking with TERRADEC decking accessories. 
In addition to the FTS and Power Fast deck screws, which are a real hit with users, here is a set of products to ensure your deck lasts and is always a welcoming place.

FTA-UP rubber raising wedge: To prevent water from stagnating on the joist
When building a wooden deck, it's important to consider water drainage. The FTA-UP extension wedge must be placed between the ground and the joist to ensure water drainage and prevent stagnation, which will damage the wood in the medium term.

Advantage: 
• It provides sound insulation,
• It protects the wood against humidity,
• It is rot-proof,
• It is non-slip and made from recycled rubber,
• 8 mm thick, it complies with DTU 51.4 “Exterior wooden decking” which recommends at least 5 mm.

FTA-RT adhesive tape: For protecting the upper surface of joists
Just as it's important to protect the joists from ground moisture, it's also important to provide protection between the joists and the wooden slats. Water evaporates more slowly at these points of contact.

The FTA-RT adhesive protection strip adheres easily to all types of wood and effectively protects it against moisture. This ensures a longer lifespan for the work.

Advantage: 
• It is tear-resistant (1 mm thick: thicker than what is traditionally offered on the market).
• It is very resistant to atmospheric conditions, UV and ozone.
• 80 mm wide, it covers most of the joists.
• No tools required: it is installed and adheres directly to the joist.

FTA-SP blade spacer: For uniform blade installation
Certainly one of the most important points when laying decking: the spacing of the boards.
It's well known that wood can shift. Deck boards swell and shrink depending on the weather conditions. If there's insufficient spacing, there's a risk of unpleasant surprises. Therefore, during installation, it's important to respect the recommended spacing, depending on the wood's moisture content and type.
To accommodate all possible spacings, fischer has developed a deck board spacer with 6 available positions: from 3 to 8 mm, more than most spacers available on the market.
FTA-SP deck board spacers provide uniform spacing between boards, regardless of the shape of the deck.

Invisible clip FTA-IPW / IPA: The professional solution for the invisible fixing of wooden deck boards
The FTA-IPW clip ensures fast, invisible, and durable installation of wooden deck boards. The FTA-IPW / -IPA invisible clip was designed with the swelling and shrinkage behavior of the wood in mind. Equipped with spacer pins, the fischer clips are suitable for all types of wooden decking.

Advantage: 
• No visible screws: the wooden slats are fixed in an invisible way.
• The clip ventilates the terrace thanks to its raising effect.
• Suitable for all blade widths, the fischer clip is adjustable from 120 to 150 mm.
• Automatic blade spacing: no need to use blade spacers.
• Practical, it is offered in the form of a kit of 50 adjustable clips with stainless steel screws.

FTA-V blade raiser spacer: The universal solution for visible fixing
It ensures good ventilation of the terrace, avoiding the effects of humidity when the board/joist comes into contact, while allowing automatic spacing between the boards (7 mm spacer lug). It is installed quickly and without tools. 
Cuttable by simple folding, the FTA-V blade raising spacer can be positioned as the first blade against a foundation to provide the necessary spacing.

FTA-CDW countersink drill bit with stop: To guarantee the perfect aesthetics of your slats fixed by terrace screws 
The countersink drill bit with stop allows you to both pre-drill the boards and perform countersinking to prevent any splitting of the wood and thus ensure an aesthetic visual appearance of the terrace. Equipped with an adjustable stop: the countersinking depth can be set according to the type of screw head used.
The FTA-CDW countersink drill bit complies with the recommendations of DTU51.4 "Exterior wooden decking" which recommends pre-drilling and countersinking wooden boards before screwing.

Points of sale: Materials trading, Professional trading, DIY stores

Visit the website www.fischer.fr